Leather Education
Which one is right for you?
FULL GRAIN ANILINE
Uncorrected
Natural markings, color and
texture variation are hightlighted
- Fine top coat
- Develops patina over time
BUFFED ANILINE
Uncorrected
Natural markings, color and
texture variation are hightlighted
- Buffed for suede-like feel
- Develops patina over time
WAX PROTECTED ANILINE
Slightly Corrected
Natural markings, color and
texture variation are hightlighted
- Fine top coat
- Develops patina over time
ENHANCED EFFECTS
SEMI-ANILINE
Corrected
Moderate natural markings and texture variation
- Pigmented and enhanced with artisan techniques to create tonal and tactile effects
EVEN COLORATION ANILINE
Corrected
Minimal natural markings and texture variation
- Pigments added to even out coloration for a uniform look
- Protective top coat applied
No two hides are alike, and dyes absorb differently within each hide. Since it takes several hides of leather to complete one piece of furniture, there will be variation in leather color and texture. These characteristics are not flaws, they're proof of authenticity.
Leather grain at spine area is tighter
Leather around neck shows wrinkles
Leather at the flanks is pebbly
Healed scratches
Healed scars
Insect bites
Examples of marks we exclude:
Brands
Healed wounds
Deep wrinkles
Processing effects
Leather is very durable, but basic care is needed to keep it looking its best.
Dust frequently, just like other furniture
Clean often with a soft, white cloth that is lightly dampened with water
Wipe up spills immediately on all leather types
Avoid direct sunlight, it damages leather
Keep away from heating vents and fireplaces that can dry out leather
COLOR
Aniline
Leather that has been dyed with a transparent dye which penetrates all the way through the top and back surfaces, allowing all the natural characteristics of the hide to be highlighted.
Semi-aniline
Top-grain leather that is aniline dyed, and has pigment and/or other topical finishes added for enhanced effects or a more even coloration.
GRAIN
Top Grain, top layer
Splits, bottom two layers
Full Grain
Embossed Grain, more uniform texture
The outermost layer of the leather hide, which produces the highest quality leather.
Full GrainTop grain leather that has not been altered and retains its original, natural grain.
GrainThe distinctive pore and wrinkle pattern of a hide; may be either natural or embossed.
SplitsUnderlying layers of the leather hide, not top grain. Used for suede, and may be embossed to simulate top grain.
BondedA reconstituted leather product created by grinding leather scraps and mixing them with bonding agents to create a sheet of material, then embossed with a grain pattern. Often used on leather book covers.
TREATMENT
Corrected
Uncorrected
Buffed
Leather's natural surface texture has been altered to make it more uniform.
UncorrectedLeather's natural surface texture has not been altered in any way; original grain pattern and markings intact.
EmbossedTexture is added to alter or enhance the surface, resulting in uniform grain or unique patterns.
BuffedThe top surface of the hide is sanded to give the leather a soft, velvety feel.
Top CoatA clear protective coating to help resist spills and soiling, making it easier to maintain the appearance of the leather.
ENHANCEMENTS
Sauvage
Pull up effect
Crackle effect
Bonded, leather product
PatinaThe desirable change in appearance of leather due to normal use and time, affecting its color, texture and luster.
SauvageA two-tone or marbled effect created by applying dyes or pigments to create highs and lows in coloration.
Oil-protectedDuring the tanning process, oils are infused into the surface to create a soft, pliable feel. As the leather is pulled, the oils separate, creating variation in color.
Pull UpLeather that shows bursts of color when pulled, often a lighter color. When upholstered, these lighter areas appear where the leather is stretched, such as arms, corners and backs. Creates a naturally aged appearance.
Wax-protectedLeather that has been nished with wax for a smooth feel and burnished luster. Often, the wax will contribute to an aged, crackled look.
CrackleThe nish is applied and milled in such a way that the top layer appears to "crack" revealing the color underneath, and creating an aged look. Often achieved by the use of wax finish.